Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Blocking URL's with specific parameters from Googlebot
-
Hi,
I've discovered that Googlebot's are voting on products listed on our website and as a result are creating negative ratings by placing votes from 1 to 5 for every product. The voting function is handled using Javascript, as shown below, and the script prevents multiple votes so most products end up with a vote of 1, which translates to "poor".
How do I go about using robots.txt to block a URL with specific parameters only? I'm worried that I might end up blocking the whole product listing, which would result in de-listing from Google and the loss of many highly ranked pages.
DON'T want to block:
http://www.mysite.com/product.php?productid=1234
WANT to block:
http://www.mysite.com/product.php?mode=vote&productid=1234&vote=2
Javacript button code:
onclick="javascript: document.voteform.submit();"
Thanks in advance for any advice given.
Regards,
Asim -
Good to hear, I am glad you perservered
-
Tried them all now and all come back with "Success"... May be I'll post in the WMT Forum and see if anyone can shed light on this problem. Thanks for your help Alan, it's much appreciated.
-
Yes correct, did you try the other formats?
-
Tried "Fetch as Googlebot" in Diagnostics and it came back as "Success" so I guess the robots.txt directive is not working. I'm assuming it should have reported a failure message when attempting to fetch a URL containing "?mode=vote".
-
Wrong place, go to diagnostics, then look for fetch as googlebot
-
I added "Disallow: /mode=vote" to the robots.txt file and also manually entered it on Crawler Access page, then clicked "Test" and no errors were reported. The WMT page states that robots.txt was last downloaded 16 hours ago so I'll wait until it picks the file up again and then check for any errors. Hopefully that will do trick
-
Try this in robots.txt, I did not think that Google allows wild cards but i just read that they do.
Disallow: /*mode=vote*orDisallow: /*mode=voteorDisallow: /*modeThen try in Google WMT to read with googlebot to see if it works.The first in the list seems right to me, but I have seen others do it the other ways. -
Thanks for the reply. The site was developed using PHP, mySQL and Javascript. I was hoping there was a way to do it without getting programmers involved...
-
dont think you are going to do it in robots.txt, rather do a 301 from mode=vote to non mode vote.
If you dont know how to put this into practise, tell me what your site is built with, if it is ASP.NET, i will show you how to impliment, if not someone else should be able to help.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
What's the best way for users to upload their images to my wordpress site to promote UGC
I have looked at lots of different plugins and wanted a recommendation for an easy way for patients of ours to upload pictures of them out partying and having fun and looking beautiful so future users can see the final results instead of sometimes gory or difficult to understand before and after images. I'd like to give them the opportunity to write captions (like facebook or insta posts and would offer them incentives to do so. I don't want it to be too complicated for them or have too many steps or barriers but I do want it to look nice and slick and modern. Also do you think this would have a positive impact on SEO? I was also thinking of a Q&A app where dentists could get Q&A emails and respond - i've been doing AMA sessions and they've been really successful and I would like to bring it into out site and make it native. Thanks in advance 🙂
Technical SEO | | Smileworks_Liverpool1 -
Problems with WooCommerce Product Attribute Filter URL's
I am running a WordPress/WooCommerce site for a client, and Moz is picking up some issues with URL's generated from WooCommerce product attribute filters. For example: ..co.uk/womens-prescription-glasses/?filter_gender=mens&filter_style=full-rim&filter_shape=oval How do I get Google to ignore these filters?
Technical SEO | | SushiUK
I am running Yoast Premium, but not sure if this can solve the issue? Product categories are canonicalised to the root category URL. Any suggestions very gratefully appreciated. Thanks Bob0 -
Strange URL's for client's site
We just picked up a new client and I've been doing some digging around on their site. They have quite the wide variety of URL's that make for a rather confusing experience. One of the milder examples is their "About" page. Normally I would expect something along the lines of: www.website.com/about I see: www.website.com/default.asp?Page=About I'm typically a graphic designer and know basically nothing about code, but I just assume this has something funky to do with how their website was constructed. I'm assuming this isn't particularly SEO friendly, but it doesn't seem too bad. Until I got to another section of their site. It's a section that logically should look like: www.website.com/training/public-seminars It's: www.website.com/default.asp?Page=MT&Area=Seminars&Sub=MRM Now that's nonsensical to me! Normally if a client has terrible URL's, I'd say let's do some redirects, but I guess I'm a little intimidated by these. Do the URL's have to be structured like this for some reason? Am I missing some important area of coding here? However, the most bizarre example is a link back to their website from yellowpages.com. Where normally I would expect it to lead to their homepage, I get this bizarre-looking thing: http://website1-px.rtrk.com/?utm_source=ReachLocal&utm_medium=PPC&utm_campaign=AssetManagement&reference_id=15&publisher=yellowpages&placement=ypwebsitemip&action_target=listing_website And as you browse through the site, that strange domain stays. For example the About page is now: http://website1-px.rtrk.com/default.asp?Page=About I would try to google this but I have no idea where to even start! What is going on with these links? Will we be able to fix them to something presentable without breaking their website?
Technical SEO | | everestagency0 -
XML Sitemap and unwanted URL parameters
We currently don't have an XML sitemap for our site. I generated one using Screaming Frog and it looks ok, but it also contains my tracking url parameters (ref=), which I don't want Google to use, as specified in GWT. Cleaning it will require time and effort which I currently don't have. I also think that having one could help us on Bing. So my question is: Is it better to submit a "so-so" sitemap than having none at all, or the risks are just too high? Could you explain what could go wrong? Thanks !
Technical SEO | | jfmonfette0 -
Correct linking to the /index of a site and subfolders: what's the best practice? link to: domain.com/ or domain.com/index.html ?
Dear all, starting with my .htaccess file: RewriteEngine On
Technical SEO | | inlinear
RewriteCond %{HTTP_HOST} ^www.inlinear.com$ [NC]
RewriteRule ^(.*)$ http://inlinear.com/$1 [R=301,L] RewriteCond %{THE_REQUEST} ^./index.html
RewriteRule ^(.)index.html$ http://inlinear.com/ [R=301,L] 1. I redirect all URL-requests with www. to the non www-version...
2. all requests with "index.html" will be redirected to "domain.com/" My questions are: A) When linking from a page to my frontpage (home) the best practice is?: "http://domain.com/" the best and NOT: "http://domain.com/index.php" B) When linking to the index of a subfolder "http://domain.com/products/index.php" I should link also to: "http://domain.com/products/" and not put also the index.php..., right? C) When I define the canonical ULR, should I also define it just: "http://domain.com/products/" or in this case I should link to the definite file: "http://domain.com/products**/index.php**" Is A) B) the best practice? and C) ? Thanks for all replies! 🙂
Holger0 -
Should I block robots from URLs containing query strings?
I'm about to block off all URLs that have a query string using robots.txt. They're mostly URLs with coremetrics tags and other referrer info. I figured that search engines don't need to see these as they're always better off with the original URL. Might there be any downside to this that I need to consider? Appreciate your help / experiences on this one. Thanks Jenni
Technical SEO | | ShearingsGroup0 -
Old URL redirect to New URL
Alright I did something dumb a year a go and I'm still paying for it. I changed my hyphenated URL to the non-hyphenated version when I redesigned my website. I say it was dumb because I lost most of my link juice even though I did 301 redirects (via the htaccess file) for almost all of the pages I could find in Google's index. Here's my problem. My new site took a huge hit in traffic (down 60%) when I made the change and even though I've done thousands of redirects my old site is still showing up in the SERPS and send much if not most of my traffic. I don't want to take the old site down in fear it will kill all of my traffic. What should I do? Is there a better method I should explore then 301 redirects? Could the other site be affecting my current rank since it's still there? (FYI...both sites are built on the WP platform). Any help or ideas are greatly appreciated. Thank you! Joe
Technical SEO | | kaje0 -
What's the SEO impact of url suffixes?
Is there an advantage/disadvantage to adding an .html suffix to urls in a CMS like WordPress. Plugins exist to do it, but it seems better for the user to leave it off. What do search engines prefer?
Technical SEO | | Cornucopia0