Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Partial Match or RegEx in Search Console's URL Parameters Tool?
-
So I currently have approximately 1000 of these URLs indexed, when I only want roughly 100 of them.
Let's say the URL is www.example.com/page.php?par1=ABC123=&par2=DEF456=&par3=GHI789=
All the indexed URLs follow that same kinda format, but I only want to index the URLs that have a par1 of ABC (but that could be ABC123 or ABC456 or whatever). Using URL Parameters tool in Search Console, I can ask Googlebot to only crawl URLs with a specific value. But is there any way to get a partial match, using regex maybe?
Am I wasting my time with Search Console, and should I just disallow any page.php without par1=ABC in robots.txt?
-
No problem
Hope you get it sorted!
-Andy
-
Thank you!
-
Haha, I think the train passed the station on that one. I would have realised eventually... XD
Thanks for your help!
-
Don't forget that . & ? have a specific meaning within regex - if you want to use them for pattern matching you will have to escape them. Also be aware that not all bots are capable of interpreting regex in robots.txt - you might want to be more explicit on the user agent - only using regex for Google bot.
User-agent: Googlebot
#disallowing page.php and any parameters after it
disallow: /page.php
#but leaving anything that starts with par1=ABC
allow: page.php?par1=ABC
Dirk
-
Ah sorry I missed that bit!
-Andy
-
Disallowing them would be my first priority really, before removing from index.
The trouble with this is that if you disallow first, Google won't be able to crawl the page to act on the noindex. If you add a noindex flag, Google won't index them the next time it comes-a-crawling and then you will be good to disallow
I'm not actually sure of the best way for you to get the noindex in to the page header of those pages though.
-Andy
-
Yep, have done. (Briefly mentioned in my previous response.) Doesn't pass
-
I thought so too, but according to Google the trailing wildcard is completely unnecessary, and only needs to be used mid-URL.
-
Hi Andy,
Disallowing them would be my first priority really, before removing from index. Didn't want to remove them before I've blocked Google from crawling them in case they get added back again next time Google comes a-crawling, as has happened before when I've simply removed a URL here and there. Does that make sense or am I getting myself mixed up here?
My other hack of a solution would be to check the URL in the page.php, and if URL includes par1=ABC then insert noindex meta tag. (Not sure if that would work well or not...)
-
My guess would be that this line needs an * at the end.
Allow: /page.php?par1=ABC* -
Sorry Martijn, just to jump in here for a second - Ria, you can test this via the Robots.txt testing tool in search console before going live to make sure it work.
-Andy
-
Hi Martijn, thanks for your response!
I'm currently looking at something like this...
**user-agent: *** #disallowing page.php and any parameters after it
disallow: /page.php #but leaving anything that starts with par1=ABC
allow: /page.php?par1=ABCI would have thought that you could disallow things broadly like that and give an exception, as you can with files in disallowed folders. But it's not passing Google's robots.txt Tester.
One thing that's probably worth mentioning really is that there are only two variables that I want to allow of the par1 parameter. For example's sake, ABC123 and ABC456. So would need to be either a partial match or "this or that" kinda deal, disallowing everything else.
-
Hi Ria,
I have never tried regular expressions in this way, so I can't tell you if this would work or not.
However, If all 1000 of these URL's are already indexed, just disallowing access won't then remove them from Google. You would ideally be able to place a noindex tag on those pages and let Google act on them, then you will be good to disallow. I am pretty sure there is no option to noindex under the URL Parameter Tool.
I hope that makes sense?
-Andy
-
Hi Ria,
What you could do, but it also depends on the rest of your structure is Disallow these urls based on the parameters (what you could do in a worst case scenario is that you would disallow all URLs and then put an exception Allow in there as well to make sure you still have the right URLs being indexed).
Martijn.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
My url disappeared from Google but Search Console shows indexed. This url has been indexed for more than a year. Please help!
Super weird problem that I can't solve for last 5 hours. One of my urls: https://www.dcacar.com/lax-car-service.html Has been indexed for more than a year and also has an AMP version, few hours ago I realized that it had disappeared from serps. We were ranking on page 1 for several key terms. When I perform a search "site:dcacar.com " the url is no where to be found on all 5 pages. But when I check my Google Console it shows as indexed I requested to index again but nothing changed. All other 50 or so urls are not effected at all, this is the only url that has gone missing can someone solve this mystery for me please. Thanks a lot in advance.
Intermediate & Advanced SEO | | Davit19850 -
Forwarded vanity domains, suddenly resolving to 404 with appended URL's ending in random 5 characters
We have several vanity domains that forward to various pages on our primary domain.
Intermediate & Advanced SEO | | SS.Digital
e.g. www.vanity.com (301)--> www.mydomain.com/sub-page (200) These forwards have been in place for months or even years and have worked fine. As of yesterday, we have seen the following problem. We have made no changes in the forwarding settings. Now, inconsistently, they sometimes resolve and sometimes they do not. When we load the vanity URL with Chrome Dev Tools (Network Pane) open, it shows the following redirect chains, where xxxxx represents a random 5 character string of lower and upper case letters. (e.g. VGuTD) EXAMPLE:
www.vanity.com (302, Found) -->
www.vanity.com/xxxxx (302, Found) -->
www.vanity.com/xxxxx (302, Found) -->
www.vanity.com/xxxxx/xxxxx (302, Found) -->
www.mydomain.com/sub-page/xxxxx (404, Not Found) This is just one example, the amount of redirects, vary wildly. Sometimes there is only 1 redirect, sometimes there are as many as 5. Sometimes the request will ultimately resolve on the correct mydomain.com/sub-page, but usually it does not (as in the example above). We have cross-checked across every browser, device, private/non-private, cookies cleared, on and off of our network etc... This leads us to believe that it is not at the device or host level. Our Registrar is Godaddy. They have not encountered this issue before, and have no idea what this 5 character string is from. I tend to believe them because per our analytics, we have determined that this problem only started yesterday. Our primary question is, has anybody else encountered this problem either in the last couple days, or at any time in the past? We have come up with a solution that works to alleviate the problem, but to implement it across hundreds of vanity domains will take us an inordinate amount of time. Really hoping to fix the cause of the problem instead of just treating the symptom.0 -
Incorrect URL shown in Google search results
Can anyone offer any advice on how Google might get the url which it displays in search results wrong? It currently appears for all pages as: <cite>www.domainname.com › Register › Login</cite> When the real url is nothing like this. It should be: www.domainname.com/product-type/product-name. This could obviously affect clickthroughs. Google has indexed around 3,000 urls on the site and they are all like this. There are links at the top of the page on the website itself which look like this: Register » Login » which presumably could be affecting it? Thanks in advance for any advice or help!
Intermediate & Advanced SEO | | Wagada0 -
What's the deal with significantLinks?
http://schema.org/significantLink Schema.org has a definition for "non-navigation links that are clicked on the most." Presumably this means something like the big green buttons on Moz's homepage. But does anyone know how they affect anything? In http://a-moz.groupbuyseo.org/blog/schemaorg-a-new-approach-to-structured-data-for-seo#comment-142936, Jeremy Nelson says " It's quite possible that significant links will pass anchor text as well if a previous link to the page was set in navigation, effictively making obselete the first-link-counts rule, and I am interested in putting that to test." This is a pretty obscure comment but it's one of the only results I could find on the subject. Is this BS? I can't even make out what all of it is saying. So what's the deal with significantLinks and how can we use them to SEO?
Intermediate & Advanced SEO | | NerdsOnCall0 -
Brackets vs Encoded URLs: The "Same" in Google's eyes, or dup content?
Hello, This is the first time I've asked a question here, but I would really appreciate the advice of the community - thank you, thank you! Scenario: Internal linking is pointing to two different versions of a URL, one with brackets [] and the other version with the brackets encoded as %5B%5D Version 1: http://www.site.com/test?hello**[]=all&howdy[]=all&ciao[]=all
Intermediate & Advanced SEO | | mirabile
Version 2: http://www.site.com/test?hello%5B%5D**=all&howdy**%5B%5D**=all&ciao**%5B%5D**=all Question: Will search engines view these as duplicate content? Technically there is a difference in characters, but it's only because one version encodes the brackets, and the other does not (See: http://www.w3schools.com/tags/ref_urlencode.asp) We are asking the developer to encode ALL URLs because this seems cleaner but they are telling us that Google will see zero difference. We aren't sure if this is true, since engines can get so _hung up on even one single difference in character. _ We don't want to unnecessarily fracture the internal link structure of the site, so again - any feedback is welcome, thank you. 🙂0 -
How to check a website's architecture?
Hello everyone, I am an SEO analyst - a good one - but I am weak in technical aspects. I do not know any programming and only a little HTML. I know this is a major weakness for an SEO so my first request to you all is to guide me how to learn HTML and some basic PHP programming. Secondly... about the topic of this particular question - I know that a website should have a flat architecture... but I do not know how to find out if a website's architecture is flat or not, good or bad. Please help me out on this... I would be obliged. Eagerly awaiting your responses, BEst Regards, Talha
Intermediate & Advanced SEO | | MTalhaImtiaz0 -
Adding index.php at the end of the url effect it's rankings
I have just had my site updated and we have put index.php at the end of all the urls. Not long after the sites rankings dropped. Checking the backlinks, they all go to (example) http://www.website.com and not http://www.website.com/index.php. So could this change have effected rankings even though it redirects to the new url?
Intermediate & Advanced SEO | | authoritysitebuilder0 -
There's a website I'm working with that has a .php extension. All the pages do. What's the best practice to remove the .php extension across all pages?
Client wishes to drop the .php extension on all their pages (they've got around 2k pages). I assured them that wasn't necessary. However, in the event that I do end up doing this what's the best practices way (and easiest way) to do this? This is also a WordPress site. Thanks.
Intermediate & Advanced SEO | | digisavvy0