Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Why is rel="canonical" pointing at a URL with parameters bad?
-
Context
Our website has a large number of crawl issues stemming from duplicate page content (source: Moz).
According to an SEO firm which recently audited our website, some amount of these crawl issues are due to URL parameter usage. They have recommended that we "make sure every page has a Rel Canonical tag that points to the non-parameter version of that URL…parameters should never appear in Canonical tags."
Here's an example URL where we have parameters in our canonical tag...
http://www.chasing-fireflies.com/costumes-dress-up/womens-costumes/
rel="canonical" href="http://www.chasing-fireflies.com/costumes-dress-up/womens-costumes/?pageSize=0&pageSizeBottom=0" />
Our website runs on IBM WebSphere v 7.
Questions
- Why it is important that the rel canonical tag points to a non-parameter URL?
- What is the extent of the negative impact from having rel canonicals pointing to URLs including parameters?
- Any advice for correcting this?
Thanks for any help!
-
Thanks for the response, Eric.
My research suggested the same plan of attack: 1) fixing the canonical tags and 2) Google Search Console URL Parameters. It's helpful to get your confirmation.
My best guess is that the parameters you've cited above are not needed for every URL. I agree that this looks like something WebSphere Commerce probably controls. I'm a few organizational layers removed from whoever set this up for us. I'll try to track down where we can control that.
-
Thanks Peter!
-
Peter has a great answer with some good resources referenced, and i'll try to add on a little bit:
1. Why it is important that the rel canonical tag points to a non-parameter URL?
It's important to use clean URLs so search engines can understand the site structure (like Peter mentioned), which will help reduce the potential for index bloat and ranking issues. The more pages out there containing the same content (ie duplicate content), the harder it will be for search engines to determine which is the best page to show in search results. While there is no "duplicate content penalty" there could be a self inflicted wound by providing too many similar options. The canonical tag is supposed to be a level of control for you to tell Google which page is the most appropriate version. In this case it should be the clean URL since that will be where you want people to start. Users can customize from there using faceted navigation or custom options.
2. What is the extent of the negative impact from having rel canonicals pointing to URLs including parameters?
Basically duplicate content and indexing issues. Both of those things you really want to avoid when running an eComm shop since that will make your pages compete with each other for ranking. That could cost ranking, visits, and revenue if implemented wrong.
3. Any advice for correcting this?
Fix the canonical tags on the site would be your first step. Next you would want to exclude those parameters in the parameter handling section of Google Search Console. That will help by telling Google to ignore URLs with the elements you add in that section. It's another step to getting clean URLs showing up in search results.
I tried getting to http://www.chasing-fireflies.com/costumes-dress-up/mens-costumes/ and realize the parameters are showing up by default like: http://www.chasing-fireflies.com/costumes-dress-up/mens-costumes/#w=*&af=cat2:costumedressup_menscostumes%20cat1:costumedressup%20pagetype:products
Are the parameters needed for every URL? Seems like this is a websphere commerce setup kind of thing.
-
Clean (w/o parameters) canonical URL helps Google to understand better your url structure and avoid several mistakes:
https://googlewebmastercentral.blogspot.bg/2013/04/5-common-mistakes-with-relcanonical.html <- mistake N:1
http://www.hmtweb.com/marketing-blog/dangerous-rel-canonical-problems/ <- mistake N:4So - your company that giving this advise is CORRECT! You should provide naked URLs everywhere when it's possible.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Are rel=author and rel=publisher meta tags currently in use?
Hello, Do these meta tags have any current usage? <meta name="author" content="Author Name"><meta name="publisher" content="Publisher Name"> I have also seen this usage linking to a companies Google+ Page:Thank you
Intermediate & Advanced SEO | | srbello0 -
Should I disallow all URL query strings/parameters in Robots.txt?
Webmaster Tools correctly identifies the query strings/parameters used in my URLs, but still reports duplicate title tags and meta descriptions for the original URL and the versions with parameters. For example, Webmaster Tools would report duplicates for the following URLs, despite it correctly identifying the "cat_id" and "kw" parameters: /Mulligan-Practitioner-CD-ROM
Intermediate & Advanced SEO | | jmorehouse
/Mulligan-Practitioner-CD-ROM?cat_id=87
/Mulligan-Practitioner-CD-ROM?kw=CROM Additionally, theses pages have self-referential canonical tags, so I would think I'd be covered, but I recently read that another Mozzer saw a great improvement after disallowing all query/parameter URLs, despite Webmaster Tools not reporting any errors. As I see it, I have two options: Manually tell Google that these parameters have no effect on page content via the URL Parameters section in Webmaster Tools (in case Google is unable to automatically detect this, and I am being penalized as a result). Add "Disallow: *?" to hide all query/parameter URLs from Google. My concern here is that most backlinks include the parameters, and in some cases these parameter URLs outrank the original. Any thoughts?0 -
When i search for my domain name - google asks "did you mean" - why?
Hi all, I just noticed something quite odd - if i do a search for my domain name (see: http://goo.gl/LBc1lz) google shows my domain as first result, but it also asks "did i mean" and names another website with very similar name. the other site has far lower PA/DA according to Moz, any ideas why google is doing this? and more inportantly how i could stop it? please advise James
Intermediate & Advanced SEO | | isntworkdull0 -
Canonical URL & sitemap URL mismatch
Hi We're running a Magento store which doesn't have too much stock rotation. We've implemented a plugin that will allow us to give products custom canonical URLs (basically including the category slug, which is not possible through vanilla Magento). The sitemap feature doesn't pick up on these URLs, so we're submitting URLs to Google that are available and will serve content, but actually point to a longer URL via a canonical meta tag. The content is available at each URL and is near identical (all apart from the breadcrumbs) All instances of the page point to the same canonical URL We are using the longer URL in our internal architecture/link building to show this preference My questions are; Will this harm our visibility? Aside from editing the sitemap, are there any other signals we could give Google? Thanks
Intermediate & Advanced SEO | | tomcraig860 -
Set up a rel canonical
I have a question. I was wondering, if it was possible to set up a rel canonical. When I can't access the non canonical pages? For example, my site as at www.site.com , but the non cannocail is at site.com is their any way to set thet up without actually edting it at site.com ? Thanks for your help
Intermediate & Advanced SEO | | PeterRota0 -
Rel=canonical tag on original page?
Afternoon All,
Intermediate & Advanced SEO | | Jellyfish-Agency
We are using Concrete5 as our CMS system, we are due to change but for the moment we have to play with what we have got. Part of the C5 system allows us to attribute our main page into other categories, via a page alaiser add-on. But what it also does is create several url paths and duplicate pages depending on how many times we take the original page and reference it in other categories. We have tried C5 canonical/SEO add-on's but they all seem to fall short. We have tried to address this issue in the most efficient way possible by using the rel=canonical tag. The only issue is the limitations of our cms system. We add the canonical tag to the original page header and this will automatically place this tag on all the duplicate pages and in turn fix the problem of duplicate content. The only problem is the canonical tag is on the original page as well, but it is referencing itself, effectively creating a tagging circle. Does anyone foresee a problem with the canonical tag being on the original page but in turn referencing itself? What we have done is try to simplify our duplicate content issues. We have over 2500 duplicate page issues because of this aliasing add-on and want to automate the canonical tag addition, rather than go to each individual page and manually add this tag, so the original reference page can remain the original. We have implemented this tag on one page at the moment with 9 duplicate pages/url's and are monitoring, but was curious if people had experienced this before or had any thoughts?0 -
How Rel=Prev & Rel=Next work for me?
I have implemented Rel=Prev & Rel=Next tag on my website. I would like to give example URL to know more about it. http://www.vistapatioumbrellas.com/market-umbrellas?limit=40&p=3 http://www.vistapatioumbrellas.com/market-umbrellas?limit=40&p=4 http://www.vistapatioumbrellas.com/market-umbrellas?limit=40&p=5 Right now, I have blocked paginated pages by Robots.txt by following query. Disallow: /*?p= I have removed disallow syntax from Robots.txt for paginated pages. But, I have confusion with duplicate page title. If you will check all 3 pages so you will find out duplicate page title across all pages. I know that, duplicate page title is harmful for SEO. Will Google crawl + index all paginated pages? If yes so which page will get maximum benefits in organic ranking? Is there any specific way which may help me to solve this issue?
Intermediate & Advanced SEO | | CommercePundit0 -
How to fix issues regarding URL parameters?
Today, I was reading help article for URL parameters by Google. http://www.google.com/support/webmasters/bin/answer.py?answer=1235687 I come to know that, Google is giving value to URLs which ave parameters that change or determine the content of a page. There are too many pages in my website with similar value for Name, Price and Number of product. But, I have restricted all pages by Robots.txt with following syntax. URLs:
Intermediate & Advanced SEO | | CommercePundit
http://www.vistastores.com/table-lamps?dir=asc&order=name
http://www.vistastores.com/table-lamps?dir=asc&order=price
http://www.vistastores.com/table-lamps?limit=100 Syntax in Robots.txt
Disallow: /?dir=
Disallow: /?p=
Disallow: /*?limit= Now, I am confuse. Which is best solution to get maximum benefits in SEO?0