Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Unique page for each product variant? (Not eCommerce)
-
Hi Mozzers,
Just looking for a little advice before I launch into a huge workload. We have landing pages for vehicle manufacturers. We then have anchor links in that page for each vehicle model that manufacturer has, with further info on the model further down the page.
So we're toying with the idea of launching a unique page for each of the models rather than having them all on the same landing page.
This will take an age and a minute but if it is worth it, we want to do it. Do you guys see a benefit to having unique pages for each model? Do you think it would attract more natural links? Would this help or hinder the manufacturer landing page in general? Should the manufacturer landing page be noindex so as to avoid duplicate content issues?
I can see a lot of work and risk, just looking for a few opinions.
PM for more info.
Thanks a lot people,
Jamie
-
Cheers for the input Nico, you're right. Variant is not the right word I just can't find the right terminology ha!
Our product is always the same it can just be applied to all models of car/van etc so this may be one of those grey areas. It's a vague question really, I think we'll just have to run a trial and see what happens over a few months.
Thanks for taking the time!
Jamie
-
I recently posed this question the other way around, i.e. a site had different pages (technically totally unconnected) for each product variant and it caused certain problems: https://a-moz.groupbuyseo.org/community/q/duplicate-content-through-product-variants
I am not sure if this 100% applies to you: I would not use "different model" and "variant" as synonyms. If they are different models, they are different, unique products and have distinct features, advantages, maybe extras etc. Variants, to me, are for example different colour, maybe the same model with different extras or similar. There might be some grey zone where different models might actually be quite like variants, differing little from each other - then I'd ask if they differ enough to say something about each and/or contrast them.
For different models I would in fact chose different pages that go deeper into details. (Think of different books from the same publisher!) For variants, having more than one page is problematic. If I had the free choice, I'd bundle all variants on a single page with dropdowns to select the variant. There is also the question if variants are sufficiently different to write unique content for each - if that is the case, it could justify separate pages. A definite benefit of those is that they can be linked directly.
Regards,
Nico
-
Hi Jamie Booker,
Interesting point. I would like to share my points to handle it from UX and SEO perspective neatly. So, here's my understanding about your product: you have multiple product pages and their variations, say you have a product "My Product" which has 2 variations "Variation A" and "Variation B" (variation can be based on color, type etc. attributes).
Here, you can itemise these product variations and consider the following solution to handle it:
-
Variation pages would be available at www.example.com/my-product/variation-a and www.example.com/my-product/variation-b respectively for "Variation A" and "Variation B" of the product "My Product".
-
Make sure you have the canonical URL without the variation id/title set for your variation pages. For instance,
for these variation pages.
-
Mark one of these variations as your default product which will be available at www.example.com/my-product. For example, www.example.com/my-product will display the same content that www.example.com/my-product/variation-a will display.
This way you'll have one single URL for a product page for bots which is www.example.com/my-product and all other variation pages exist with variation identifier which will resolve customer's experience point. Also, as we're exposing only single page to bots in this case, we're neatly able to handle duplicate content penalty issue as well.
You can refer the following 2 variation URLs for the same:
- Apple iPhone 6 - Gold: http://www.flipkart.com/apple-iphone-6/p/itme8ra6fzzme5sz?pid=MOBEYHZ2VSVKHAZH
- Apple iPhone 6 - Silver: http://www.flipkart.com/apple-iphone-6/p/itme8ra6fzzme5sz?pid=MOBEYHZ2VRNZZ2J5
Hope this helps!
-
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
How to find orphan pages
Hi all, I've been checking these forums for an answer on how to find orphaned pages on my site and I can see a lot of people are saying that I should cross check the my XML sitemap against a Screaming Frog crawl of my site. However, the sitemap is created using Screaming Frog in the first place... (I'm sure this is the case for a lot of people too). Are there any other ways to get a full list of orphaned pages? I assume it would be a developer request but where can I ask them to look / extract? Thanks!
Technical SEO | | KJH-HAC1 -
When should a variant be a variant and when should it be a separate product from an SEO POV?
Hi all, We are looking at changing our current e-commerce store to a new platform and in doing so thinking of making some changes to how we list products in sub-categories. We have seen related questions asking about splitting a single product into multiple products to rank for different terms, but we are wondering about combining multiple products into a single product page? The examples we have seen have been about fashion items with variants of colour and size. However, the products we sell have variances that change the appearance, dimensions and technical specification, so we would like to ask the MOZ community if combining products with these variances would still be deemed good practice? We sell wood burning stoves and a good example of a product that we are considering combining is the Scan 85 stove, which is available in eight different configurations: 85-1, 85-2, 85-3 etc. Scan themselves refer to each version as a separate product and they are bought, stocked and sold as separate products. Wood burning stoves like this typically have a firebox in the centre and then design options that can change the top, side, base, door, colour and fuel. In this example, the firebox is the Scan 85 and the variation is the last number, each of which corresponds to a different design option changing both the appearance and dimensions (see attached image). We have them listed as eight different products on our current site, one for each version. Primarily because each option has its own name (albeit 1-digit difference) which when we created the pages we thought that more pages would present us with more ranking opportunity. However, we have since learnt that because these eight pages are all so similar and it is difficult to write unique content about each product (with the 85-1 and 85-2 the only difference between the models are the black trim on the 85-1 and the silver trim on 85-2). Especially as when talking about the firebox itself, how well the fire burns, how controllable it is etc, will be the same for all versions. Likewise, earning backlinks to eight separate pages is also very difficult. Exploring this lead, us to the question, when is a variant a variant and when is it a separate product? Are there hard and fast rules for what defines variants and products? Or does it simply vary from industry to industry product to product, and if so should we be looking at it from a UX or SEO POV, when making that decision? Our hope is that if we combine these eight products into a single high-quality page, it will present us with a greater ranking opportunity for that one page over eight individual pages. We also hope that in doing so will allow us to create a more intuitive UX on a single page with a unique description, more reviews focused on one page and an explanation of the options available, all of which should lead to more conversions. Finally, by creating a better UX and unique detailed description we hope that there is a higher chance of us earning product level backlinks then we do with eight lower quality pages. One of the issues in creating a single product page for all the variants is the sub-category/results pages, as we would be removing eight simple products and replacing them with one complex product. We have questions over how this would work from a filter/facet level whereby when you apply a filter there is an expectation that the image shown will match the criteria, so if we filter for stoves with a silver trim for example, there is an expectation to only see stoves that have a silver trim in the results. When you have separate product pages you have separate listings which makes this easier to only bring back the models matching the criteria. However, when you have a single page this is more complex as you will need a default image for non-filtered results and then the ability to assign an image to lots of different attributes so that the correct image is always shown that matches the criteria selected. All of which we have been assured is do-able but adds an extra level of complexity to the process from an admin side. The alternative to doing this would be to create eight simple/child products and link them to one configurable/parent product. We could them list the simple products into the results pages and have them all linking back to the main configurable product which could load with the options of the simple product that was selected. From an SEO POV this brings in some more work, redirecting each page to the parent, but ultimately this could provide a better UX and might be the better solution. Has anyone got any experience in doing either of these options before? Both options above with affect the number of products we have available, so does the number of products in a sub-category effect the ability for that category page to rank? We currently have around 500 products in our wood burning stoves category, with perhaps an additional 300 to add. If we go down the combining into a single product page route this will reduce the number of products by around a third. If we keep all the simple/child products, then this will stay around the same. So, have we missed something obvious? Is there a glaring issue that we have overlooked from an SEO point of view as well as from the customer experience? We would appreciate your thoughts on this. Thanks, Reece scan85-1.jpg
Technical SEO | | fireproductsuk0 -
Canonical tag use for ecommerce product page detail
Hi, I have a category page I want to rank. This page has 24 different products quite similar but not exactly the same.
Technical SEO | | amastone
I want to use canonical tag in any product to the parent category.
Is this a right use of the canonical?
Category page I'm talking about is : Finger bits If I understand how to use canonical tags I can improve all my category pages. thanks marco0 -
Duplicate Content Issues on Product Pages
Hi guys Just keen to gauge your opinion on a quandary that has been bugging me for a while now. I work on an ecommerce website that sells around 20,000 products. A lot of the product SKUs are exactly the same in terms of how they work and what they offer the customer. Often it is 1 variable that changes. For example, the product may be available in 200 different sizes and 2 colours (therefore 400 SKUs available to purchase). Theese SKUs have been uploaded to the website as individual entires so that the customer can purchase them, with the only difference between the listings likely to be key signifiers such as colour, size, price, part number etc. Moz has flagged these pages up as duplicate content. Now I have worked on websites long enough now to know that duplicate content is never good from an SEO perspective, but I am struggling to work out an effective way in which I can display such a large number of almost identical products without falling foul of the duplicate content issue. If you wouldnt mind sharing any ideas or approaches that have been taken by you guys that would be great!
Technical SEO | | DHS_SH0 -
When creating parent and child pages should key words be repeated in url and page title?
We are in the direct mail advertising business: PrintLabelAndMail.com Example: Parent:
Technical SEO | | JimDirectMailCoach
Postcard Direct Mail Children:
Postcard Mailings
Postcard Design
Postcard Samples
Postcard Pricing
Postcard Advantages should "postcard" be repeated in the URL and Page Title? and in this example should each of the 5 children link back directly to the parent or would it be better to "daisy chain" them using each as parent for the next?0 -
Page titles in browser not matching WP page title
I have an issue with a few page titles not matching the title I have In WordPress. I have 2 pages, blog & creative gallery, that show the homepage title, which is causing duplicate title errors. This has been going on for 5 weeks, so its not an a crawl issue. Any ideas what could cause this? To clarify, I have the page title set in WP, and I checked "Disable PSP title format on this page/post:"...but this page is still showing the homepage title. Is there an additional title setting for a page in WP?
Technical SEO | | Branden_S0 -
Google counting numbers of products on category pages - what about pagination ?
Hi there, Whilst checking out the SERPS, as you do, I noticed that where our category page appears, google now seems to be counting the number of products (what it calls items) on the product page and displaying this in the 1st part of the description (see image attached). My problem is we employ pagination, so that our category page will have 15 items on it, then there are paginated results for the rest, with either ?page=2 or page-2/ etc. appended to the URL. Although this is only a minor issue, I was just wondering if there was a way to change the number of products displayed on that page to be the entire number of products in that category, is there a microformat markup or something that can over-ride what google has detected ? Furthermore is this system of pagination effective ? I have considered using javascript pagination, such that all products would be loaded on to the one page but hidden until 'paginated', but I was worried about having hidden elements on the page, and also the impact of load times. Although I think this may solve the problem and display the true number of products in a section! Any help much appreciated, Stuart b4urme.jpg
Technical SEO | | stukerr0