Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Is using dots in URL path really a problem?
-
we have a couple of pages displaying a dot in the URL path like
domain.com/mr.smith/widget-mr.smith
It displays fine in chrome, firefox and IE and for the user it may actually look better than replacing it by _ or -.
Did this ever cause problems to anybody?
Any statement from google about it?
Should I change existing URLs?If so, which other characters can I use in the URL instead of underscore and dash, since in our system dash and underscore are already used for rewriting other characters.
Thanks
-
Hi Andrews,
While the difference between dashes and underscores use to be a big issue a few years back its something that seems to hold minimal merit now. The two can be used rather interchangeably without any major impact. This was phased out around the same time as exact-match-domain value was as far too many people were abusing the long-tail dash page method.
-
While I've never come across this exact problem before I can share with you one my mantras that applies here:
"If a system (browser, search engine, etc) needs to perform a data re-write, you aren't accessible enough."
Google loves accessibility. It always wants the user to be able to easily access information and it wants it's spiders to be able to easily index and categorize the information. When accessibility options such as javascript versioning or if a site is using flash or not have an impact then it would only logically follow that more obvious structural access issues do come into effect.
From a technology stand point I can tell you that "." is not traditionally used in the scope of a URL/file structure as it a reserved character and therefore your structure is being re-written to display those. Much like international domains like the chinese internationalized domain name extension .中国 (which is basically a visual re-encode of the unicode: xn--fiqs8s) For the sake of accessibility, proper structure formatting and system practicality you should avoid using non-standard characters such as the . in your url
-
Hi!
As far as I know, this really isn't a huge problem (could be mistaken). I guess it depends...
In regards to readability, I prefer using dashes (-), as they tend to be easier to read. Underscores may be mistaken for a space). Here's what Matt Cutts had to say about this some years ago: http://www.mattcutts.com/blog/whitehat-seo-tips-for-bloggers/ (and http://www.mattcutts.com/blog/dashes-vs-underscores/)
I believe I have read that Google and other search engines read URLs like this when looking for semantic meanings:
- /this-is-part-of-a-website-address = this is part of a website address
- /this_is_part_of_a_website_address = thisispartofawebsiteaddress
At least that used to be the case...It could be changed now.
In your example, I would not obsess too much about it, as it gives perfect semantic meaning. Have you considered removing special characters, instead of replacing them with a "-" ?
Hope this helps.
Best regards,
Anders
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Will disallowing URL's in the robots.txt file stop those URL's being indexed by Google
I found a lot of duplicate title tags showing in Google Webmaster Tools. When I visited the URL's that these duplicates belonged to, I found that they were just images from a gallery that we didn't particularly want Google to index. There is no benefit to the end user in these image pages being indexed in Google. Our developer has told us that these urls are created by a module and are not "real" pages in the CMS. They would like to add the following to our robots.txt file Disallow: /catalog/product/gallery/ QUESTION: If the these pages are already indexed by Google, will this adjustment to the robots.txt file help to remove the pages from the index? We don't want these pages to be found.
Intermediate & Advanced SEO | | andyheath0 -
Duplicate content on URL trailing slash
Hello, Some time ago, we accidentally made changes to our site which modified the way urls in links are generated. At once, trailing slashes were added to many urls (only in links). Links that used to send to
Intermediate & Advanced SEO | | yacpro13
example.com/webpage.html Were now linking to
example.com/webpage.html/ Urls in the xml sitemap remained unchanged (no trailing slash). We started noticing duplicate content (because our site renders the same page with or without the trailing shash). We corrected the problematic php url function so that now, all links on the site link to a url without trailing slash. However, Google had time to index these pages. Is implementing 301 redirects required in this case?1 -
Magento Trailing Slash URL Problem
Howdy Mozzers! Our magento store URL's are accessible with or without a trailing slash at the end. Canonical's and 301 redirects are not set up for one of them at the moment. Will this cause duplicate issue? Do we need to set canonical or 301 up? Which one is recommended? MozAddict
Intermediate & Advanced SEO | | MozAddict0 -
Avoiding Duplicate Content with Used Car Listings Database: Robots.txt vs Noindex vs Hash URLs (Help!)
Hi Guys, We have developed a plugin that allows us to display used vehicle listings from a centralized, third-party database. The functionality works similar to autotrader.com or cargurus.com, and there are two primary components: 1. Vehicle Listings Pages: this is the page where the user can use various filters to narrow the vehicle listings to find the vehicle they want.
Intermediate & Advanced SEO | | browndoginteractive
2. Vehicle Details Pages: this is the page where the user actually views the details about said vehicle. It is served up via Ajax, in a dialog box on the Vehicle Listings Pages. Example functionality: http://screencast.com/t/kArKm4tBo The Vehicle Listings pages (#1), we do want indexed and to rank. These pages have additional content besides the vehicle listings themselves, and those results are randomized or sliced/diced in different and unique ways. They're also updated twice per day. We do not want to index #2, the Vehicle Details pages, as these pages appear and disappear all of the time, based on dealer inventory, and don't have much value in the SERPs. Additionally, other sites such as autotrader.com, Yahoo Autos, and others draw from this same database, so we're worried about duplicate content. For instance, entering a snippet of dealer-provided content for one specific listing that Google indexed yielded 8,200+ results: Example Google query. We did not originally think that Google would even be able to index these pages, as they are served up via Ajax. However, it seems we were wrong, as Google has already begun indexing them. Not only is duplicate content an issue, but these pages are not meant for visitors to navigate to directly! If a user were to navigate to the url directly, from the SERPs, they would see a page that isn't styled right. Now we have to determine the right solution to keep these pages out of the index: robots.txt, noindex meta tags, or hash (#) internal links. Robots.txt Advantages: Super easy to implement Conserves crawl budget for large sites Ensures crawler doesn't get stuck. After all, if our website only has 500 pages that we really want indexed and ranked, and vehicle details pages constitute another 1,000,000,000 pages, it doesn't seem to make sense to make Googlebot crawl all of those pages. Robots.txt Disadvantages: Doesn't prevent pages from being indexed, as we've seen, probably because there are internal links to these pages. We could nofollow these internal links, thereby minimizing indexation, but this would lead to each 10-25 noindex internal links on each Vehicle Listings page (will Google think we're pagerank sculpting?) Noindex Advantages: Does prevent vehicle details pages from being indexed Allows ALL pages to be crawled (advantage?) Noindex Disadvantages: Difficult to implement (vehicle details pages are served using ajax, so they have no tag. Solution would have to involve X-Robots-Tag HTTP header and Apache, sending a noindex tag based on querystring variables, similar to this stackoverflow solution. This means the plugin functionality is no longer self-contained, and some hosts may not allow these types of Apache rewrites (as I understand it) Forces (or rather allows) Googlebot to crawl hundreds of thousands of noindex pages. I say "force" because of the crawl budget required. Crawler could get stuck/lost in so many pages, and my not like crawling a site with 1,000,000,000 pages, 99.9% of which are noindexed. Cannot be used in conjunction with robots.txt. After all, crawler never reads noindex meta tag if blocked by robots.txt Hash (#) URL Advantages: By using for links on Vehicle Listing pages to Vehicle Details pages (such as "Contact Seller" buttons), coupled with Javascript, crawler won't be able to follow/crawl these links. Best of both worlds: crawl budget isn't overtaxed by thousands of noindex pages, and internal links used to index robots.txt-disallowed pages are gone. Accomplishes same thing as "nofollowing" these links, but without looking like pagerank sculpting (?) Does not require complex Apache stuff Hash (#) URL Disdvantages: Is Google suspicious of sites with (some) internal links structured like this, since they can't crawl/follow them? Initially, we implemented robots.txt--the "sledgehammer solution." We figured that we'd have a happier crawler this way, as it wouldn't have to crawl zillions of partially duplicate vehicle details pages, and we wanted it to be like these pages didn't even exist. However, Google seems to be indexing many of these pages anyway, probably based on internal links pointing to them. We could nofollow the links pointing to these pages, but we don't want it to look like we're pagerank sculpting or something like that. If we implement noindex on these pages (and doing so is a difficult task itself), then we will be certain these pages aren't indexed. However, to do so we will have to remove the robots.txt disallowal, in order to let the crawler read the noindex tag on these pages. Intuitively, it doesn't make sense to me to make googlebot crawl zillions of vehicle details pages, all of which are noindexed, and it could easily get stuck/lost/etc. It seems like a waste of resources, and in some shadowy way bad for SEO. My developers are pushing for the third solution: using the hash URLs. This works on all hosts and keeps all functionality in the plugin self-contained (unlike noindex), and conserves crawl budget while keeping vehicle details page out of the index (unlike robots.txt). But I don't want Google to slap us 6-12 months from now because it doesn't like links like these (). Any thoughts or advice you guys have would be hugely appreciated, as I've been going in circles, circles, circles on this for a couple of days now. Also, I can provide a test site URL if you'd like to see the functionality in action.0 -
What is the best URL structure for categories?
A client's site currently uses the URL structure: www.website.com/�tegory%/%postname% Which I think is optimised fairly well, as the categories are keywords being targeted. However, as they are using a category hierarchy, often times the URL looks like this: www.website.com/parent-category/child-category/some-post-titles-are-quite-long-as-they-are-long-tail-terms Best practise often dictates (such as point 3 in this Moz article) that shorter URLs are better for several reasons. So I'm left with a few options: Remove the category from the URL Flatten the category hierarchy Shorten post titles two a word or two - which would hurt my long tail search term traffic. Leave it as it is What do we think is the best route to take? Thanks in advance!
Intermediate & Advanced SEO | | underscorelive0 -
Using Folkd for Video Backlink
Hi Mozzers, What are your thoughts on using www.folkd.com for video SEO? We have a few company videos and would like to possibly get a backlink by either embedding one of our youtube videos on our site or self hosting the video. Are bookmarking sites like this spammy?
Intermediate & Advanced SEO | | Travis-W0 -
Where to put a page ID in a URL?
Hello, My company is going to change URLs to example.com/category or example.com/product. When we will change the URLs to product or category pages somehow we have to check whether the requested page is from category table in DB or from products table (this gives much speed to page load time). So we have to choose how to make the different product and category pages.
Intermediate & Advanced SEO | | komeksimas
Programmers said that we need to insert id to URL. So the question is: Which is the better way to place an id to an URL? example.com/product-name?id=111 example.com/product-name/111 example.com/product_name-111 Or maybe we should use some other punctuation mark to separate id from product name? p.s. I have read Dynamic URLs vs. static URLs by Google and it still didn't answered which is the best for all of the pages. Somehow others solve this problem by typing only the names to the URL, but could anyone tell what that technology should be?0 -
Overly-Dynamic URL
Hi, We have over 5000 pages showing under Overly-Dynamic URL error Our ecommerce site uses Ajax and we have several different filters like, Size, Color, Brand and we therefor have many different urls like, http://www.dellamoda.com/Designer-Pumps.html?sort=price&sort_direction=1&use_selected_filter=Y http://www.dellamoda.com/Designer-Accessories.html?sort=title&use_selected_filter=Y&view=all http://www.dellamoda.com/designer-handbags.html?use_selected_filter=Y&option=manufacturer%3A&page3 Could we use the robots.txt file to disallow these from showing as duplicate content? and do we need to put the whole url in there? like: Disallow: /*?sort=price&sort_direction=1&use_selected_filter=Y if not how far into the url should be disallowed? So far we have added the following to our robots,txt Disallow: /?sort=title Disallow: /?use_selected_filter=Y Disallow: /?sort=price Disallow: /?clearall=Y Just not sure if they are correct. Any help would be greatly appreciated. Thank you,Kami
Intermediate & Advanced SEO | | dellamoda2