Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Special characters in URL
-
Will registered trademark symbol within a URL be bad? I know some special characters are unsafe (#, >, etc.) but can not find anything that mentions registered trademark.
Thanks!
-
Jen - I agree with Eli. It's best not to use the TM symbol in a URL string - it will confuse the end user when it's URL encoded and scrambled. Rather, put the mark on your pages and in images.
If you have gone through the registration process with the USPTO (United States Patent and Trademark Office), you should be using the
symbol next to your mark, and not the TM symbol.
According to the Trademark FAQs on the USPTO site: http://www.uspto.gov/faq/trademarks.jsp#_Toc275426682
Do federal regulations govern the use of the designations "TM" or "SM" or the
symbol?
If you claim rights to use a mark, you may use the "TM" (trademark) or "SM" (service mark) designation to alert the public to your claim of a “common-law” mark. No registration is necessary to use a "TM" or "SM" symbol and you may continue to use these symbols even if the USPTO refuses to register your mark. Those symbols put people on notice that you claim rights in the mark, although common law doesn't give you all the rights and benefits of federal registration.
You may only use the federal registration symbol "
" after the USPTO actually registers a mark, not while an application is pending. And it may only be used on or in connection with the goods/services listed in the federal trademark registration and while the registration is still alive (you may not continue to use it if you don’t maintain the registration or it expires). Although there are no specific requirements on where the symbol should be placed relative to the mark, most businesses use the symbol in the upper right corner of the mark. Note: Because several foreign countries use “
” to indicate that a mark is registered in that country, use of the symbol by the holder of a foreign registration may be proper.
From another section_: There are no specific requirements on where the “
” symbol should be placed relative to the mark, but most businesses use the symbol in the upper right corner of the mark._
Hope this helps!
-- Jeff -
Jen,
I'm not sure if it will be bad based on research, but based on what you aim for in a URL (clarity, what the article is about, user experience, descriptive keywords, etc...) the TM Registered may not fit well.
Plus, be careful, your TM (if using symbols) will get changed to
(
) or
(
) in the URL - making it less user friendly to type in (let alone look at)..
Hope this Helps!
Eli Overbey
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Same URL for languages sub-directories
Hi All, I have a main domain and 9 different subdirectories for languages, example: www.example.com/page.html www.example.com/uk/page-uk.html www.example.com/es/page-es.html we are implementing hreflang tags for the languages, but we are thinking to get rid of the dashes on the languages URL: -uk or -es, so it will be: www.example.com/page.html www.example.com/uk/page.html www.example.com/es/page.hrml would this be a problem? to have same page names even if they are in different subdirectories? would we need to add canonical tags, at lease for the main domain URLs? www.kornferry.com/page.html Thank you, Rachel
Technical SEO | | RaquelSaiz0 -
Old URLs Appearing in SERPs
Thirteen months ago we removed a large number of non-corporate URLs from our web server. We created 301 redirects and in some cases, we simply removed the content as there was no place to redirect to. Unfortunately, all these pages still appear in Google's SERPs (not Bings) for both the 301'd pages and the pages we removed without redirecting. When you click on the pages in the SERPs that have been redirected - you do get redirected - so we have ruled out any problems with the 301s. We have already resubmitted our XML sitemap and when we run a crawl using Screaming Frog we do not see any of these old pages being linked to at our domain. We have a few different approaches we're considering to get Google to remove these pages from the SERPs and would welcome your input. Remove the 301 redirect entirely so that visits to those pages return a 404 (much easier) or a 410 (would require some setup/configuration via Wordpress). This of course means that anyone visiting those URLs won't be forwarded along, but Google may not drop those redirects from the SERPs otherwise. Request that Google temporarily block those pages (done via GWMT), which lasts for 90 days. Update robots.txt to block access to the redirecting directories. Thank you. Rosemary One year ago I removed a whole lot of junk that was on my web server but it is still appearing in the SERPs.
Technical SEO | | RosemaryB3 -
Spaces (actual spaces) in URL
Hi all, Is there a huge loss of SEO performance if a URL shows spaces with an actual space (i.e. %20) in the URL rather than a "-" (or indeed a "_")? I know the preferred option is to have a "-", but I am just wondering if it is worth our effort to manually change the "%20" to a "-" in all the instances? Thanks 🙂 Diana
Technical SEO | | Diana.varbanescu0 -
Blog article URL - with or without date?
Quick question to all you folks: does including the date in a blog article's permalink affect rankings? For example, here's an article with the month and year, as well as the blog title: http://www.ayzanyc.com/blog/2012/12/difference-between-hot-chocolate-hot-cocoa/ Is it better to omit the date and just put the blog title? Also, if is better to avoid using the date, is it worth it to change the link structure of our previous articles (given that the URL will now be different), or should we just focus on future articles? Thanks ahead of time for your advice.
Technical SEO | | onurkiyak0 -
MozBar picking up iFrame source as URL
Running a WordPress site with a custom theme. Using a standard wp_head or wp_footer hook to insert the standard code for a Facebook Like, Twitter count / Google Plus count into the site - basically that hook just places the code, programmatically, into the HEAD (where applicable) or right before the BODY closes. For some reason, MozBar is picking up the URL of the iFrame that gets inserted with this code as the URL of the site. I don't have it live right now due to the issues, but I can turn it "on" for anyone who wants a look. Anyone else have this issue? I'm using the code directly from developers.facebook.com for the Like box, and the Google Plus button, Twitter too. Nothing fancy here.
Technical SEO | | joechicago0 -
Urls with or without .html ending
Hello, Can anyone show me some authority info on wheher links are better with or without a .html ending? Thanks is advance
Technical SEO | | sesertin0 -
Should me URLs be uppercase or lowercase
I'm in the middle of doing a bunch of 301 redirects for me site. Should I make them Lowercase, uppercase, or does it matter? Also, do I want to be using hyphens (-), or underscores (_)? Any other tips? EX: http://www.stupid.com/golf-slippers.html OR http://www.stupid.com/Golf-Slippers.html
Technical SEO | | JustinStupid0 -
Duplicate canonical URLs in WordPress
Hi everyone, I'm driving myself insane trying to figure this one out and am hoping someone has more technical chops than I do. Here's the situation... I'm getting duplicate canonical tags on my pages and posts, one is inside of the WordPress SEO (plugin) commented section, and the other is elsewhere in the header. I am running the latest version of WordPress 3.1.3 and the Genesis framework. After doing some testing and adding the following filters to my functions.php: <code>remove_action('wp_head', 'genesis_canonical'); remove_action('wp_head', 'rel_canonical');</code> ... what I get is this: With the plugin active + NO "remove action" - duplicate canonical tags
Technical SEO | | robertdempsey
With the plugin disabled + NO "remove action" - a single canonical tag
With the plugin disabled + A "remove action" - no canonical tag I have tried using only one of these remove_actions at a time, and then combining them both. Regardless, as long as I have the plugin active I get duplicate canonical tags. Is this a bug in the plugin, perhaps somehow enabling the canonical functionality of WordPress? Thanks for your help everyone. Robert Dempsey0