Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Url shows up in "Inurl' but not when using time parameters
-
Hey everybody,
I have been testing the Inurl: feature of Google to try and gauge how long ago Google indexed our page. SO, this brings my question.
If we run inurl:https://mysite.com all of our domains show up.
If we run inurl:https://mysite.com/specialpage the domain shows up as being indexed
If I use the "&as_qdr=y15" string to the URL, https://mysite.com/specialpage does not show up.
Does anybody have any experience with this? Also on the same note when I look at how many pages Google has indexed it is about half of the pages we see on our backend/sitemap. Any thoughts would be appreciated.
TY!
-
There are several ways to do this, some are more accurate than others. If you have access to the site which contain the web-page on Google Analytics, obviously you could filter your view down to one page / landing page and see when the specified page first got traffic (sessions / users). Note that if a page existed for a long time before it saw much usage, this wouldn't be very accurate.
If it's a WordPress site which you have access to, edit the page and check the published date and / or revision history. If it's a post of some kind then it may displays its publishing date on the front-end without you even having to log in. Note that if some content has been migrated from a previous WordPress site and the publishing dates have not been updated, this may not be wholly accurate either.
You can see when the WayBack Machine first archived the specified URL. The WayBack Machine uses a crawler which is always discovering new pages, not necessarily on the date(s) they were created (so this method can't be trusted 100% either)
In reality, even using the "inurl:" and "&as_qdr=y15" operators will only tell you when Google first saw a web-page, it won't tell you how old the page is. Web pages do not record their age in their coding, so in a way your quest is impossible (if you want to be 100% accurate)
-
So, then I will pose a different question to you. How would you determine the age of a page?
-
Oh ty! Ill try that out!
-
Not sure on the date / time querying aspect, but instead of using "inurl:https://mysite.com" you might have better luck checking indexation via "site:mysite.com" (don't put in subdomains, www or protocol like HTTP / HTTPS)
Then be sure to tell Google to 'include' omitted results (if that notification shows up, sometimes it does - sometimes it doesn't!)
You can also use Google Search Console to check indexed pages:
- https://d.pr/i/oKcHzS.png (screenshot)
- https://d.pr/i/qvKhPa.png (screenshot)
You can only see the top 1,000 - but it does give you a count of all the indexed pages. I am pretty sure you could get more than 1k pages out of it, if you used the filter function repeatedly (taking less than 1k URLs from each site-area at a time)
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Why home Page is not showing showing in search results?
The USA Glitz I search the exact title & keyword but still its not showing though there is no related websites in this term. What can i do ? What kind of strategy needs to follow ? Kindly help me out . Thanks 😢
On-Page Optimization | | henrichjrr4201 -
Duplicate 'meta title' issue (AMP & NON-AMP Pages)
how to fix duplicate meta title issue in amp and non-amp pages? example.com
On-Page Optimization | | 21centuryweb
example.com/amp We have set the 'meta title' in desktop version & we don't want to change the title for AMP page as we have more than 10K pages on the website. ----As per SEMRUSH Tool---- ABOUT THIS ISSUE It is a bad idea to duplicate your title tag content in your first-level header. If your page’s <title>and <h1> tags match, the latter may appear over-optimized to search engines. Also, using the same content in titles and headers means a lost opportunity to incorporate other relevant keywords for your page.</p> <p><strong>HOW TO FIX IT</strong></p> <p>Try to create different content for your <title> and <h1> tags.<br /><br />this is what they are recommending, for the above issue we have asked our team to create unique meta and post title for desktop version but what about AMP page?<br /><br />Please help!</p></title>0 -
What is the best tag to use for your Logo ?
Hi, I'm wondering what is the best tag to use on your logo. We're currently using h1 and i want to scrap that ASAP.
On-Page Optimization | | Alex.harvey.Cortex0 -
Why do I have 2 different URL's for the same page - is this good practice?
Hi GuysMy father is currently using a programmer to build his new site. Knowing a little about SEO etc, I was a little suspicious of the work carried out. **Anyone with good programming and SEO knowledge, please offer your advice!**This page http://www.thewoodgalleries.co.uk/gallery-range-wood-flooring/ which is soon to be http://www.thewoodgalleries.co.uk/engineered-wood/ you'll see has a number of different products. The products on this particular page have been built into colour categories like thishttp://www.thewoodgalleries.co.uk/engineered-wood/lights-greys http://www.thewoodgalleries.co.uk/engineered-wood/beiges http://www.thewoodgalleries.co.uk/engineered-wood/browns http://www.thewoodgalleries.co.uk/engineered-wood/darks-blacks This is fine. Eventually when we add to our selection of woods, we'll easily segment each product into "colour categories" for users to easily navigate to. My question is - Why do I have 2 different URL's for the same page - is this good practice? Please see below... Visible URL - http://www.thewoodgalleries.co.uk/engineered-wood/browns/cipressa/Below is the permalink seen in Word Press for this page also.Permalink: http://www.thewoodgalleries.co.uk/engineered-wood/browns-engineered-wood/cipressa/and in the Word Press snippet shows the same permalink urlCipressa | Engineered Brown Wood | The Wood Gallerieswww.thewoodgalleries.co.uk/engineered-wood/browns-engineered-wood/cipressa/ Buy Cipressa Engineered Brown Wood, available at The Wood Galleries, London. Provides an Exceptional Foundation for Elegant Décor, Extravagant .. If this is completely ok and has no negative search impact - then I'm happy. If not what should I advise to my programmer to do? Your help would be very much appreciated. Regards Faye
On-Page Optimization | | Faye2340 -
How important are clean URLs?
Just wanting to understand the importance of clean URLs in regards to SEO effectiveness. Currently, we have URLs for a site that reads as follows: http://www.interhampers.com.au/c/90/Corporate Gift Hampers Should we look into modifying this so that the URL does not have % or figures?
On-Page Optimization | | Gavo1 -
Hiding body copy with a 'read more' drop down option
Hi I just want to confirm how potentially damaging using java script to hide lots of on page body copy with a 'read more' button is ? As per other moz Q&A threads i was told that best not to use Javascript to do this & instead "if you accomplish this with CSS and collapsible/expandable <DIV> tags it's totally fine" so thats what i advised my clients dev. However i recently noticed a big drop in rankings aprox 1 weeks after dev changing the body copy format (hiding alot of it behind a 'read more' button) so i asked them to confirm how they did implement it and they said: "done in javascript but on page load the text is defaulting to show" (which is contrary to my instructions) So how likely is it that this is causing problems ? since coincides with ranking drop OR if text is defaulting to show it should be ok/not cause probs ? And should i request that they redo as originally instructed (css & collapsible divs) asap ? All Best Dan
On-Page Optimization | | Dan-Lawrence0 -
How to Structure URL's for Multiple Locations
We are currently undergoing a site redesign and are trying to figure out the best way to structure the URL's and breadcrumbs for our many locations. We currently have 60 locations nationwide and our URL structure is as follows: www.mydomain.com/locations/{location} Where {location} is the specific street the location is on or the neighborhood the location is in. (i.e. www.mydomain.com/locations/waterford-lakes) The issue is, {location} is usually too specific and is not a broad enough keyword. The location "Waterford-Lakes" is in Orlando and "Orlando" is the important keyword, not " Waterford Lakes". To address this, we want to introduce state and city pages. Each state and city page would link to each location within that state or city (i.e. an Orlando page with links to "Waterford Lakes", "Lake Nona", "South Orlando", etc.). The question is how to structure this. Option 1 Use the our existing URL and breadcrumb structure (www.mydomain.com/locations/{location}) and add state and city pages outside the URL path: www.mydomain.com/{area} www.mydomain.com/{state} Option 2 Build the city and state pages into the URL and breadcrumb path: www.mydomain.com/locations/{state}/{area}/{location} (i.e www.mydomain.com/locations/fl/orlando/waterford-lakes) Any insight is much appreciated. Thanks!
On-Page Optimization | | uBreakiFix0 -
SEO value of "in the news" links on home page?
Notice more sites have an "in the News" section on the home page, or something similar like press releases... Apart from providing users fresh content, is there an SEO value to this? What is the explanation for this? Have a feeling the answer is obvious but just not too sure Thanks a lot.
On-Page Optimization | | inhouseninja0