Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Vanity URL vs domain URL
-
Hi guys,
Our CEO is having an interview with a known broadcaster on radio. During the interview he will mention a specific URL www.example.com/marketingcampaign that we want track on Google Analytics, therefore behaving like a vanity URL redirecting to the actual URL www.example.com/resources/primary-keyword-2018.
Would this work the same way a vanity URL in terms of tracking or not such as following guideline here ? I am asking because vanity URLs are supposed to be completely different domain name that gets purchased and in our case it is the same domain name just with a different URI.
thanks guys!
-
Hi Taysir
You can catch all the data you need by analysing this URL in analytics: www.example.com/marketingcampaign
Why do you need to 301 somewhere else? It doesn't make any sense.
UTM parameters could only be used if you append an existing URL (eg the homepage) with tracking. for example, if you had an email campaign or Facebook. As yours is aural (listened to on the radio) you wouldn't be able to convey it so it would be useless. Worth noting though.
Regards
Nigel
-
Hi Nigel,
Thanks for your response.
So you're recommending not to 301 redirect www.example.com/marketingcampaign to www.example.com/resources/primary-keyword-2018 but the whole purpose is to capture the listeners who remember this one time URL(this will only be mentioned for this radio show) within Google Analytics. If I don't redirect this URL then I will never know how many radio listeners came to our website, right?
Or am i missing something here?
Finally could you clarify this bit _"You could just use a preferred landing page and use UTM parameters to track in Analytics if you knew which source it was coming from." _What is the setup and how would this work?
Thanks for your time!
-
Hi Taysir
I can understand why you would want to do this and this is a perfectly acceptable way of doing it. However, I'm not sure why you would want to redirect it to another page. Why not just put all the information required on that page www.example.com/marketingcampaign?
There may (depending on who you listen to - I'm with Rand) up to 15% loss of link juice passing through a 301 redirect.
Also by publicising the 'vanity URL' it may well be indexed by Google but then de-indexed in favour of www.example.com/resources/primary-keyword-2018. because of the 301 redirect. When people searched for that page it wouldn't exist!
Intentionally setting up a URL that 301s is just bad practice and you risk Google not respecting it and listing both URLs anyway - so any ranking could go out of the window.
So in conclusion - fine having the 'vanity URL' (as you call it - it's a bit of an old-fashioned expression - any URL these days could be considered a 'vanity URL' - it was in the days when URLs had long strings of numbers and non-relevenat characters) but don't bother 301 redirecting. Use that single URL to provide all the information you need. You will be able to see it in Google analytics along with all of the source data.
(If you do decide to redirect - I wouldn't - do it in the htaccess file as it will all be seamless. Don't do it by java on the 'vanity URL' page. )
You could just use a preferred landing page and use UTM parameters to track in Analytics if you knew which source it was coming from.
https://support.google.com/analytics/answer/1033867?hl=en
Regards Nigel
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Redirecting one domain to another using utm tags
I have two live websites, which have both been live for over 10 years, so we have plenty of backlinks to both...domain1.com & domain2.com. Domain 1 and all urls is being merged into domain2.com. So 301 redirects will be setup for every page of the site....domain1.com/abc-1234/ to > domain2.com/abc-1234/ In Google analytics for domain2.com we want to be able to see which visits we have received as a result of a redirect from domain1.com. It is possible to see these visits that come in via organic, referrals and social etc, as those will come to us with the referral as domain1.com. However, with direct traffic, i.e. if someone types domain1.com into their search bar, these visits will be assigned as direct and we are not able to tell in GA if those users have typed in domain2.com, or domain1.com to get to our webpage. There are some suggestions in forums of adding utm_source tracking to all redirects (and add canonicals to those urls pointing to the non utm_source version), but my concern is that Google is going to have to go through one extra step to reach the page on the redirected domain. So without the utm source code Google will follow this route
Reporting & Analytics | | Sayers
domain1.com/123/ to domain2.com/123/ With the utm source code Google will follow this route
domain.com/123/ to domain2.com/123/?utm_source... then see's canonical, so moves to domain2.com/123/ So essentially I am giving Google one extra step to follow before it gets to the equivalent page on the new site. Is this an issue, and/or are there any other ways to track this redirection without adding extra parameters to the url?0 -
"index.htm" for all url's in google analytics
I don't have this issue with other wordpress websites, only this one website, and I don't know what's causing the issue: Google Analytics is adding an "index.htm" to every single page on the website. So it is tracking the pages, I see no errors - is it tracking the right page? When I click on the page link in a report, I naturally go to a "404 page not found" since the website address isn't "www.example.com/rewards/index.htm" - but instead the actual address would be:
Reporting & Analytics | | cceebar
"www.example.com/rewards/". I have navigated to View Settings in GA to insure "default page" is empty. Although adding anything else to this field does not effect the page url in analytics reports either. Could it be htaccess file - or a plugin effecting the htaccess file?_Cindy0 -
We have a client that wants to apply UTM URL tagging to track local organic traffic in Google Analytics. Is there any benefit in doing this?
One of our clients requested that we apply UTM URL tagging to better track organic traffic in Google Analytics. We found this to be an odd request because we are most familiar with UTM tracking for special campaigns (referral tracking, PPC, email tracking, etc). Is there any benefit of applying UTM tags to urls to analyze local organic traffic in Google Analytics? Are there any resources out there about this? Thanks!
Reporting & Analytics | | RosemaryB0 -
Google Analytics: Different stats for date range vs single month?
I've been scratching my head, chin, and you name it over this one. I have an advanced segment to remove bot traffic from my data. When I look at the Audience Overview data for a single month (let's say Aug). I am shown a session count. No problems here, however If I set the date range to (January - August). The august monthly stats is incorrect, much lower. What this means is that, if I export a CSV report from Jan-Aug, the data is wrong compared to individually recording a month. Anyone faced this? I've asked the question over at the Google Analytics technical section as well, but no answer P.S I even used the 'control the number of sessions used to calculate this report' tool but no luck.
Reporting & Analytics | | Bio-RadAbs0 -
Google Analytics - Next Page Path is the Same URL?
Hey Everyone, I have a Google analytics question. I'm looking through a client's site and when I look at the next page path, I get the same URL as the next path. For example, on the homepage, the next page path I get is the homepage again? This happens for all URL's, is this an implementation error? Is there a way to fix this? Thanks!
Reporting & Analytics | | EvansHunt0 -
Does traffic coming from Adwords increase overall Domain Authority or Page Rank?
If I'm setting up an Adwords campaign, will setting my homepage as the landing page boost my domain rank? and will the Page Rank of the landing page get boosted because of the high click rate coming from the Adwords campaign?
Reporting & Analytics | | s2bkevin0 -
How to remove unwanted dynamic parameters from a URL in Google Analytics
Hi, Would really appreciate some help with this. I have been experimenting with RegEx to achieve this but as I’ve never used it before am currently failing miserably. We have conversion pages i need to set goals for that are formatted as below: https://www.domain.co.uk//Application_Form/(S(ewhbqp5cki0mppuzukunkqno))/enterCardDetails.aspx I need to remove the (s(xxx)) section from the URL as rather than one pages i currently have thousands of unique URL's. What’s catching me out is that as it’s not a URL parameter I can’t discount and as half way through can’t just do head matches etc to /entercarddetails Help would be much appreciated. Thanks.
Reporting & Analytics | | Sarbs0 -
How do you set www vs non-www in Bing Webmaster Tools?
A site of mine is showing as example.com instead of www.example.com in Bing and Yahoo. I know where to set the preferred domain to www in Google Webmaster Tools, but I can't seem to find that function in Bing Webmaster Tools. Can someone please point me in the right direction?
Reporting & Analytics | | DentalPlanSEO0