Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Unique page for each product variant? (Not eCommerce)
-
Hi Mozzers,
Just looking for a little advice before I launch into a huge workload. We have landing pages for vehicle manufacturers. We then have anchor links in that page for each vehicle model that manufacturer has, with further info on the model further down the page.
So we're toying with the idea of launching a unique page for each of the models rather than having them all on the same landing page.
This will take an age and a minute but if it is worth it, we want to do it. Do you guys see a benefit to having unique pages for each model? Do you think it would attract more natural links? Would this help or hinder the manufacturer landing page in general? Should the manufacturer landing page be noindex so as to avoid duplicate content issues?
I can see a lot of work and risk, just looking for a few opinions.
PM for more info.
Thanks a lot people,
Jamie
-
Cheers for the input Nico, you're right. Variant is not the right word I just can't find the right terminology ha!
Our product is always the same it can just be applied to all models of car/van etc so this may be one of those grey areas. It's a vague question really, I think we'll just have to run a trial and see what happens over a few months.
Thanks for taking the time!
Jamie
-
I recently posed this question the other way around, i.e. a site had different pages (technically totally unconnected) for each product variant and it caused certain problems: https://a-moz.groupbuyseo.org/community/q/duplicate-content-through-product-variants
I am not sure if this 100% applies to you: I would not use "different model" and "variant" as synonyms. If they are different models, they are different, unique products and have distinct features, advantages, maybe extras etc. Variants, to me, are for example different colour, maybe the same model with different extras or similar. There might be some grey zone where different models might actually be quite like variants, differing little from each other - then I'd ask if they differ enough to say something about each and/or contrast them.
For different models I would in fact chose different pages that go deeper into details. (Think of different books from the same publisher!) For variants, having more than one page is problematic. If I had the free choice, I'd bundle all variants on a single page with dropdowns to select the variant. There is also the question if variants are sufficiently different to write unique content for each - if that is the case, it could justify separate pages. A definite benefit of those is that they can be linked directly.
Regards,
Nico
-
Hi Jamie Booker,
Interesting point. I would like to share my points to handle it from UX and SEO perspective neatly. So, here's my understanding about your product: you have multiple product pages and their variations, say you have a product "My Product" which has 2 variations "Variation A" and "Variation B" (variation can be based on color, type etc. attributes).
Here, you can itemise these product variations and consider the following solution to handle it:
-
Variation pages would be available at www.example.com/my-product/variation-a and www.example.com/my-product/variation-b respectively for "Variation A" and "Variation B" of the product "My Product".
-
Make sure you have the canonical URL without the variation id/title set for your variation pages. For instance,
for these variation pages.
-
Mark one of these variations as your default product which will be available at www.example.com/my-product. For example, www.example.com/my-product will display the same content that www.example.com/my-product/variation-a will display.
This way you'll have one single URL for a product page for bots which is www.example.com/my-product and all other variation pages exist with variation identifier which will resolve customer's experience point. Also, as we're exposing only single page to bots in this case, we're neatly able to handle duplicate content penalty issue as well.
You can refer the following 2 variation URLs for the same:
- Apple iPhone 6 - Gold: http://www.flipkart.com/apple-iphone-6/p/itme8ra6fzzme5sz?pid=MOBEYHZ2VSVKHAZH
- Apple iPhone 6 - Silver: http://www.flipkart.com/apple-iphone-6/p/itme8ra6fzzme5sz?pid=MOBEYHZ2VRNZZ2J5
Hope this helps!
-
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Safety Data Sheet PDFs are Showing Higher in Search Results than Product Pages
I have a client who just launched an updated website that has WooCommerce added to it. The website also has a page of Safety Data Sheets that are PDFs that contain information about some of the products. When we do a Google search for many of the products the Safety Data Sheets show up first in the search results instead of the product pages. Has anyone had this happen and know how to solve the issue?
Technical SEO | | teamodea0 -
Why Product pages are throwing Missing field "image" and Missing field "price" in Wordpress Woocommerce
I have a wordpress wocommerce website where I have uploaded 100s of products but it's giving me error in GSC under merchant listing tab. When I tested it show missing field image and missing field price. I have done everything according to https://developers.google.com/search/docs/appearance/structured-data/product#merchant-listing-experiences and applied fixed i.e. images are 800x800 and price range is also there. What else can be done here?!merchant listing.jpg
Technical SEO | | Ravi_Rana0 -
Product Schema Markup for All Products
Hi Team, Google search console used to allow you to use their structured data markup helperhttps://www.google.com/webmasters/markup-helper/u/0/ to markup multiple product pages at once that were similar. I do not see this feature anymore with the new search console. Does anyone have a recommendation for marking up multiple product pages without having to have schema markup firing in GTM for each product page?
Technical SEO | | agrier0 -
When should a variant be a variant and when should it be a separate product from an SEO POV?
Hi all, We are looking at changing our current e-commerce store to a new platform and in doing so thinking of making some changes to how we list products in sub-categories. We have seen related questions asking about splitting a single product into multiple products to rank for different terms, but we are wondering about combining multiple products into a single product page? The examples we have seen have been about fashion items with variants of colour and size. However, the products we sell have variances that change the appearance, dimensions and technical specification, so we would like to ask the MOZ community if combining products with these variances would still be deemed good practice? We sell wood burning stoves and a good example of a product that we are considering combining is the Scan 85 stove, which is available in eight different configurations: 85-1, 85-2, 85-3 etc. Scan themselves refer to each version as a separate product and they are bought, stocked and sold as separate products. Wood burning stoves like this typically have a firebox in the centre and then design options that can change the top, side, base, door, colour and fuel. In this example, the firebox is the Scan 85 and the variation is the last number, each of which corresponds to a different design option changing both the appearance and dimensions (see attached image). We have them listed as eight different products on our current site, one for each version. Primarily because each option has its own name (albeit 1-digit difference) which when we created the pages we thought that more pages would present us with more ranking opportunity. However, we have since learnt that because these eight pages are all so similar and it is difficult to write unique content about each product (with the 85-1 and 85-2 the only difference between the models are the black trim on the 85-1 and the silver trim on 85-2). Especially as when talking about the firebox itself, how well the fire burns, how controllable it is etc, will be the same for all versions. Likewise, earning backlinks to eight separate pages is also very difficult. Exploring this lead, us to the question, when is a variant a variant and when is it a separate product? Are there hard and fast rules for what defines variants and products? Or does it simply vary from industry to industry product to product, and if so should we be looking at it from a UX or SEO POV, when making that decision? Our hope is that if we combine these eight products into a single high-quality page, it will present us with a greater ranking opportunity for that one page over eight individual pages. We also hope that in doing so will allow us to create a more intuitive UX on a single page with a unique description, more reviews focused on one page and an explanation of the options available, all of which should lead to more conversions. Finally, by creating a better UX and unique detailed description we hope that there is a higher chance of us earning product level backlinks then we do with eight lower quality pages. One of the issues in creating a single product page for all the variants is the sub-category/results pages, as we would be removing eight simple products and replacing them with one complex product. We have questions over how this would work from a filter/facet level whereby when you apply a filter there is an expectation that the image shown will match the criteria, so if we filter for stoves with a silver trim for example, there is an expectation to only see stoves that have a silver trim in the results. When you have separate product pages you have separate listings which makes this easier to only bring back the models matching the criteria. However, when you have a single page this is more complex as you will need a default image for non-filtered results and then the ability to assign an image to lots of different attributes so that the correct image is always shown that matches the criteria selected. All of which we have been assured is do-able but adds an extra level of complexity to the process from an admin side. The alternative to doing this would be to create eight simple/child products and link them to one configurable/parent product. We could them list the simple products into the results pages and have them all linking back to the main configurable product which could load with the options of the simple product that was selected. From an SEO POV this brings in some more work, redirecting each page to the parent, but ultimately this could provide a better UX and might be the better solution. Has anyone got any experience in doing either of these options before? Both options above with affect the number of products we have available, so does the number of products in a sub-category effect the ability for that category page to rank? We currently have around 500 products in our wood burning stoves category, with perhaps an additional 300 to add. If we go down the combining into a single product page route this will reduce the number of products by around a third. If we keep all the simple/child products, then this will stay around the same. So, have we missed something obvious? Is there a glaring issue that we have overlooked from an SEO point of view as well as from the customer experience? We would appreciate your thoughts on this. Thanks, Reece scan85-1.jpg
Technical SEO | | fireproductsuk0 -
Product Variations (rel=canonical or 301) & Duplicate Product Descriptions
Hi All, Hoping for a bit of advice here please, I’ve been tasked with building an e-commerce store and all is going well so far. We decided to use Wordpress with Woocommerce as our shop plugin. I’ve been testing the CSV import option for uploading all our products and I’m a little concerned on two fronts: - Product Variations Duplicate content within the product descriptions **Product Variations: - ** We are selling furniture that has multiple variations (see list below) and as a result it creates c.50 product variations all with their own URL’s. Facing = Left, Right Leg style = Round, Straight, Queen Ann Leg colour = Black, White, Brown, Wood Matching cushion = Yes, No So my question is should I 301 re-direct the variation URL’s to the main product URL as from a user perspective they aren't used (we don't have images for each variation that would trigger the URL change, simply drop down options for the user to select the variation options) or should I add the rel canonical tag to each variation pointing back to the main product URL. **Duplicate Content: - ** We will be selling similar products e.g. A chair which comes in different fabrics and finishes, but is basically the same product. Most, if not all of the ‘long’ product descriptions are identical with only the ‘short’ product descriptions being unique. The ‘long’ product descriptions contain all the manufacturing information, leg option/colour information, graphics, dimensions, weight etc etc. I’m concerned that by having 300+ products all with identical ‘long’ descriptions its going to be seen negatively by google and effect the sites SEO. My question is will this be viewed as duplicate content? If so, are there any best practices I should be following for handling this, other than writing completely unique descriptions for each product, which would be extremely difficult given its basically the same products re-hashed. Many thanks in advance for any advice.
Technical SEO | | Jon-S0 -
What to do with temporary empty pages?
I have a website listing real estate in different areas that are for sale. In small villages, towns, and areas, sometimes there is nothing for sale and therefore the page is completely empty with no content except a and some footer text. I have thousand of landing pages for different areas. For example "Apartments in Tibro" or "Houses in Ljusdahl" and Moz Pro gives me some warnings for "Duplicate Content" on the empty ones (I think it does so because the pages are so empty that they are quite similar). I guess Google could also think bad of my site if I have hundreds or thousands of empty pages even if my total amount of pages are 100,000. So, what to do with these pages for these small cities, towns and villages where there is not always houses for sale? Should I remove them completely? Should I make a 404 when no houses for sale and a 200 OK when there is? Please note that I have totally 100,000+ pages and this is only about 5% of all my pages.
Technical SEO | | marcuslind900 -
Are image pages considered 'thin' content pages?
I am currently doing a site audit. The total number of pages on the website are around 400... 187 of them are image pages and coming up as 'zero' word count in Screaming Frog report. I needed to know if they will be considered 'thin' content by search engines? Should I include them as an issue? An answer would be most appreciated.
Technical SEO | | MTalhaImtiaz0