Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Why is rel="canonical" pointing at a URL with parameters bad?
-
Context
Our website has a large number of crawl issues stemming from duplicate page content (source: Moz).
According to an SEO firm which recently audited our website, some amount of these crawl issues are due to URL parameter usage. They have recommended that we "make sure every page has a Rel Canonical tag that points to the non-parameter version of that URL…parameters should never appear in Canonical tags."
Here's an example URL where we have parameters in our canonical tag...
http://www.chasing-fireflies.com/costumes-dress-up/womens-costumes/
rel="canonical" href="http://www.chasing-fireflies.com/costumes-dress-up/womens-costumes/?pageSize=0&pageSizeBottom=0" />
Our website runs on IBM WebSphere v 7.
Questions
- Why it is important that the rel canonical tag points to a non-parameter URL?
- What is the extent of the negative impact from having rel canonicals pointing to URLs including parameters?
- Any advice for correcting this?
Thanks for any help!
-
Thanks for the response, Eric.
My research suggested the same plan of attack: 1) fixing the canonical tags and 2) Google Search Console URL Parameters. It's helpful to get your confirmation.
My best guess is that the parameters you've cited above are not needed for every URL. I agree that this looks like something WebSphere Commerce probably controls. I'm a few organizational layers removed from whoever set this up for us. I'll try to track down where we can control that.
-
Thanks Peter!
-
Peter has a great answer with some good resources referenced, and i'll try to add on a little bit:
1. Why it is important that the rel canonical tag points to a non-parameter URL?
It's important to use clean URLs so search engines can understand the site structure (like Peter mentioned), which will help reduce the potential for index bloat and ranking issues. The more pages out there containing the same content (ie duplicate content), the harder it will be for search engines to determine which is the best page to show in search results. While there is no "duplicate content penalty" there could be a self inflicted wound by providing too many similar options. The canonical tag is supposed to be a level of control for you to tell Google which page is the most appropriate version. In this case it should be the clean URL since that will be where you want people to start. Users can customize from there using faceted navigation or custom options.
2. What is the extent of the negative impact from having rel canonicals pointing to URLs including parameters?
Basically duplicate content and indexing issues. Both of those things you really want to avoid when running an eComm shop since that will make your pages compete with each other for ranking. That could cost ranking, visits, and revenue if implemented wrong.
3. Any advice for correcting this?
Fix the canonical tags on the site would be your first step. Next you would want to exclude those parameters in the parameter handling section of Google Search Console. That will help by telling Google to ignore URLs with the elements you add in that section. It's another step to getting clean URLs showing up in search results.
I tried getting to http://www.chasing-fireflies.com/costumes-dress-up/mens-costumes/ and realize the parameters are showing up by default like: http://www.chasing-fireflies.com/costumes-dress-up/mens-costumes/#w=*&af=cat2:costumedressup_menscostumes%20cat1:costumedressup%20pagetype:products
Are the parameters needed for every URL? Seems like this is a websphere commerce setup kind of thing.
-
Clean (w/o parameters) canonical URL helps Google to understand better your url structure and avoid several mistakes:
https://googlewebmastercentral.blogspot.bg/2013/04/5-common-mistakes-with-relcanonical.html <- mistake N:1
http://www.hmtweb.com/marketing-blog/dangerous-rel-canonical-problems/ <- mistake N:4So - your company that giving this advise is CORRECT! You should provide naked URLs everywhere when it's possible.
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Using "nofollow" internally can help with crawl budget?
Hello everyone. I was reading this article on semrush.com, published the last year, and I'd like to know your thoughts about it: https://www.semrush.com/blog/does-google-crawl-relnofollow-at-all/ Is that really the case? I thought that Google crawls and "follows" nofollowed tagged links even though doesn't pass any PR to the destination link. If instead Google really doesn't crawl internal links tagged as "nofollow", can that really help with crawl budget?
Intermediate & Advanced SEO | | fablau0 -
Switching from HTTP to HTTPS: 301 redirect or keep both & rel canonical?
Hey Mozzers, I'll be moving several sites from HTTP to HTTPS in the coming weeks (same brand, multiple ccTLDs). We'll start on a low traffic site and test it for 2-4 weeks to see the impact before rolling out across all 8 sites. Ideally, I'd like to simply 301 redirect the HTTP version page to the HTTPS version of the page (to get that potential SEO rankings boost). However, I'm concerned about the potential drop in rankings, links and traffic. I'm thinking of alternative ways and so instead of the 301 redirect approach, I would keep both sites live and accessible, and then add rel canonical on the HTTPS pages to point towards HTTP so that Google keeps the current pages/ links/ indexed as they are today (in this case, HTTPS is more UX than for SEO). Has anyone tried the rel canonical approach, and if so, what were the results? Do you recommend it? Also, for those who have implemented HTTPS, how long did it take for Google to index those pages over the older HTTP pages?
Intermediate & Advanced SEO | | Steven_Macdonald0 -
Pagination parameters and canonical
Hello, We have a site that manages pagination through parameters in urls, this way: friendly-url.html
Intermediate & Advanced SEO | | teconsite
friendly-url.html?p=2
friendly-url.html?p=3
... We've rencently added the canonical tag pointing to friendly-url.html for all paginated results. In search console, we have the "p" parameter identified by google.
Now that the canonical has been added, should we still configure the parameter in search console, and tell google that it is being use for pagination? Thank you!0 -
When is it recommended to use a self referencing rel "canonical"?
In what type of a situation is it the best type of practice to use a self referencing rel "canonical" tag? Are there particular practices to be cautious of when using a self referencing rel "canonical" tag? I see this practice used mainly with larger websites but I can't find any information that really explains when is a good time to make use of this practice for SEO purposes. Appreciate all feedback. Thank you in advance.
Intermediate & Advanced SEO | | SEO_Promenade0 -
De-indexing product "quick view" pages
Hi there, The e-commerce website I am working on seems to index all of the "quick view" pages (which normally occur as iframes on the category page) as their own unique pages, creating thousands of duplicate pages / overly-dynamic URLs. Each indexed "quick view" page has the following URL structure: www.mydomain.com/catalog/includes/inc_productquickview.jsp?prodId=89514&catgId=cat140142&KeepThis=true&TB_iframe=true&height=475&width=700 where the only thing that changes is the product ID and category number. Would using "disallow" in Robots.txt be the best way to de-indexing all of these URLs? If so, could someone help me identify how to best structure this disallow statement? Would it be: Disallow: /catalog/includes/inc_productquickview.jsp?prodID=* Thanks for your help.
Intermediate & Advanced SEO | | FPD_NYC0 -
Set up a rel canonical
I have a question. I was wondering, if it was possible to set up a rel canonical. When I can't access the non canonical pages? For example, my site as at www.site.com , but the non cannocail is at site.com is their any way to set thet up without actually edting it at site.com ? Thanks for your help
Intermediate & Advanced SEO | | PeterRota0 -
Rel=canonical tag on original page?
Afternoon All,
Intermediate & Advanced SEO | | Jellyfish-Agency
We are using Concrete5 as our CMS system, we are due to change but for the moment we have to play with what we have got. Part of the C5 system allows us to attribute our main page into other categories, via a page alaiser add-on. But what it also does is create several url paths and duplicate pages depending on how many times we take the original page and reference it in other categories. We have tried C5 canonical/SEO add-on's but they all seem to fall short. We have tried to address this issue in the most efficient way possible by using the rel=canonical tag. The only issue is the limitations of our cms system. We add the canonical tag to the original page header and this will automatically place this tag on all the duplicate pages and in turn fix the problem of duplicate content. The only problem is the canonical tag is on the original page as well, but it is referencing itself, effectively creating a tagging circle. Does anyone foresee a problem with the canonical tag being on the original page but in turn referencing itself? What we have done is try to simplify our duplicate content issues. We have over 2500 duplicate page issues because of this aliasing add-on and want to automate the canonical tag addition, rather than go to each individual page and manually add this tag, so the original reference page can remain the original. We have implemented this tag on one page at the moment with 9 duplicate pages/url's and are monitoring, but was curious if people had experienced this before or had any thoughts?0 -
How Google treat internal links with rel="nofollow"?
Today, I was reading about NoFollow on Wikipedia. Following statement is over my head and not able to understand with proper manner. "Google states that their engine takes "nofollow" literally and does not "follow" the link at all. However, experiments conducted by SEOs show conflicting results. These studies reveal that Google does follow the link, but does not index the linked-to page, unless it was in Google's index already for other reasons (such as other, non-nofollow links that point to the page)." It's all about indexing and ranking for specific keywords for hyperlink text during external links. I aware about that section. It may not generate in relevant result during any keyword on Google web search. But, what about internal links? I have defined rel="nofollow" attribute on too many internal links. I have archive blog post of Randfish with same subject. I read following question over there. Q. Does Google recommend the use of nofollow internally as a positive method for controlling the flow of internal link love? [In 2007] A: Yes – webmasters can feel free to use nofollow internally to help tell Googlebot which pages they want to receive link juice from other pages
Intermediate & Advanced SEO | | CommercePundit
_
(Matt's precise words were: The nofollow attribute is just a mechanism that gives webmasters the ability to modify PageRank flow at link-level granularity. Plenty of other mechanisms would also work (e.g. a link through a page that is robot.txt'ed out), but nofollow on individual links is simpler for some folks to use. There's no stigma to using nofollow, even on your own internal links; for Google, nofollow'ed links are dropped out of our link graph; we don't even use such links for discovery. By the way, the nofollow meta tag does that same thing, but at a page level.) Matt has given excellent answer on following question. [In 2011] Q: Should internal links use rel="nofollow"? A:Matt said: "I don't know how to make it more concrete than that." I use nofollow for each internal link that points to an internal page that has the meta name="robots" content="noindex" tag. Why should I waste Googlebot's ressources and those of my server if in the end the target must not be indexed? As far as I can say and since years, this does not cause any problems at all. For internal page anchors (links with the hash mark in front like "#top", the answer is "no", of course. I am still using nofollow attributes on my website. So, what is current trend? Will it require to use nofollow attribute for internal pages?0
